Kwikset Rekey: New Keys for Kwikset and SmartKey Locks
Get a free rekey quote
Can you rekey a Kwikset lock?
Yes, Mobile Rekey Pros rekeys Kwikset locks, SmartKey locks included, so the old keys stop working. A traditional Kwikset pin-and-tumbler lock gets new bottom pins that match the new key; a SmartKey lock learns the new key with the SmartKey tool, without new pins. Our technicians come to you 24/7, the same day in the cities we serve.
- Available 24/7
- Same-day service in the cities we serve
- Our own technicians, not a referral network
When to rekey a Kwikset lock
Rekey a Kwikset lock whenever a key to it is out of your hands. Kwikset's own reasons to rekey include:
- Keys you lent out and never got back.
- A move into a new home, or a tenant moving out.
- A lost key, or one that keeps going missing.
How a Kwikset lock is rekeyed
How a Kwikset lock is rekeyed depends on its cylinder, the part the key goes into. Kwikset's rekeying manual covers two kinds, set side by side in the table below: traditional pin-and-tumbler cylinders and SmartKey cylinders.
Traditional pin-and-tumbler cylinders
A Kwikset pin-and-tumbler lock works by matching the cuts of the key to the bottom pins inside the cylinder plug, the part that turns with the key. To rekey it, those bottom pins are replaced with pins that match the cuts of the new key.
Kwikset doesn't print a key's cut combination on the packaging, so the new key is read with a key gauge first. Its cut numbers then point to the numbered bottom pins that go into the plug.
SmartKey cylinders
Kwikset says SmartKey locks use a different rekeying technology than traditional pin-and-tumbler cylinders, so the drawing above does not show how they work.
The SmartKey tool goes into the SmartKey hole in the face of the cylinder while the current key is in the lock and turned. Kwikset packs the tool with every SmartKey product, and its instruction sheet says the new key must be the same key type as the current one.
| Pin-and-tumbler cylinder | SmartKey cylinder | |
|---|---|---|
| During the rekey | The plug comes out of the cylinder for its new bottom pins | The lock stays on the door, and the cylinder learns the new key without new pins |
| What Kwikset's steps use | The lock's current key, the new key read with a key gauge, and numbered bottom pins from a keying kit | The lock's current key, the new key and the SmartKey tool |
Schlage locks
We rekey Schlage locks too. Schlage's rekeying guide works by repinning: new pins go in until, with the new key in the lock, every pin sits flush with the top of the plug at the shear line.
The guide also urges caution when rekeying from a duplicate key, because copies wear faster and their cuts can be off enough to make the repinned cylinder stick.
SmartKey plays no part in a Schlage rekey: Kwikset says SmartKey is a cylinder design found only on Kwikset products.
Smart locks and keypads
Kwikset offers SmartKey on its electronic locks as well as its mechanical ones. Asked how to rekey its Halo Touch smart lock, Kwikset points to its standard SmartKey instructions, which it says are the same for every product with the SmartKey feature.
Schlage's rekeying guide has its own sections for keypad locks and keypad deadbolts, and Schlage Encode smart locks have removable cylinders that can be rekeyed.
Schlage's guide adds a point about codes: changing the code of a keypad lock is a lot easier than changing its keys, and on its keypad locks the key is needed only if the battery dies after a low-battery warning goes unheeded.
Rekey or replace your Kwikset lock?
A rekey keeps your Kwikset lock and changes the key that opens it. For different hardware we replace the lock instead.
Not sure which one you need? Our page on changing the locks on a house walks through the choice. Rekey or replace your locks
What we do not do
We don't work on car locks or ignitions, and we don't make car keys or key fobs: our technicians rekey and replace the locks of homes, apartments and businesses.
On a mailbox, our part is the lock alone: we don't work on the box itself, its door or its post.
Questions about Kwikset and smart lock rekeys
Why did my SmartKey rekey fail?
Kwikset names two common reasons, both about the new key: it was not fully inserted, so the cylinder learned only part of its cuts, or it was pulled while being turned back to the starting position. An inaccurate copy or an old key with worn cuts can also fail, and Kwikset's fix is to rekey with a factory-cut key (cut at the factory) or a code-cut key (cut from the factory code, not on a key copier). When neither the old key nor the new key works, Kwikset says it sounds like a misprogrammed cylinder, and it shows how to recover it and rekey it to the new key.
Can you rekey a smart lock or a keypad lock?
Yes, Mobile Rekey Pros rekeys Kwikset and Schlage smart locks and keypad locks that take a key, so the old keys stop working.
More lock services
Change locks on a house
Rekey or replace the locks so the previous owner's keys stop working.
Rekey a deadbolt
Keep your deadbolt and get new keys; the old keys stop working.
States we serve
Colorado
Cities we serve: Denver
Next step
Last updated